Intelligent Ground Effect Detector Anti-climbing Ground Effect Shielding Detector

principle

The core technology of this product adopts microwave array intelligent detection technology, front-end detectors installed inside the microwave signal network, used to collect microwave signal changes, with waterproof cables to form the detection of protected areas, the formation of microwave detection induction field. When there are people climbing, destroying, over the protection network caused by vibration, resulting in microwave signal changes, was captured by the detector through the communication cable transmitted to the communication module for data analysis and computing, if it reaches the pre-set alarm value after the alarm platform to send out alarm signals immediately.

Application effects

No effect on the health of the exposed population when the equipment is in operation

“Ground Effect Probe Perimeter Arming System” adopts passive passive collection technology, installed in the prison under the anti-climbing net approach to the anti-climbing net to prevent the alarm, the normal operating state does not actively emit any detection wavelengths, low power consumption per unit of time, for the anti-climbing net around the activities and operations of the crowd without any health impact, to ensure that the frequency of equipment, can be used 24 hours a day continuous reading. It can be used 24 hours a day.

• The alarm rate of the “Ground Effect Detection” system is ≥95%.

This product has been certified by the testing center of the Ministry of Public Security, and the working alarm rate is ≥95%, which can ensure higher working efficiency.

• The product has a low false alarm rate and reduces the number of supervisory police calls by personnel.

Front-end detectors can be buried in the ground laying options, the shell is made of explosion-proof cast aluminum, in line with IP68 prevention standards, rain, snow, wind, sand and other weather can still work normally; due to the use of intelligent detection technology, the system can carry out its own alarm analysis, when the human body unintentionally touches the anti-climbing network or walking in the detection area, jumping up and down or small animals will not cause false alarms, reducing the number of supervisors out of the police.

• The laying program can be selected according to the user’s needs, and can meet the adjacent detector spacing of any distance between 3 meters and 16 meters.

Users can choose the laying plan according to the cost, the maximum laying distance between two adjacent detectors is 16 meters, and the optimal laying distance is 12 meters. Without considering the cost, the laying distance can be reduced to 3 meters, and a variety of detection accuracy can be selected.

• Users can define their own defense zone unit, the product reserved communication interface, with a variety of monitoring systems.

The system reserves the communication interface, can be connected to the user command center through the server, with the original monitoring system to achieve the effect of multiple monitoring. Users can set up the defense zone unit according to different alarm requirements, with independent detectors or multiple detectors to form a defense zone unit to prevent alarms. The alarm units work independently and do not affect each other.

• Alarm parameter customization, log storage, can meet the needs of a variety of prevention strategies

Differing from the function of some existing arming equipment to set alarm value uniformly, this product can set parameters independently for each detector, so as to achieve the customization of alarm parameters for single defense zone. Alarm information is automatically stored in the database, which can be queried according to the time, defense zone unit and other conditions to meet the needs of a variety of prevention strategies.

• Not restricted by the geological conditions of the laying place, all underground intrusion behaviors in the detection area are alarmed.

The installation environment of the product is not restricted by geological conditions, and can be used normally under the conditions of soil, asphalt, cement, etc. It can prevent underground intrusion in the detection area.

• Diversification of arming methods to meet the user’s arming needs.

The product can be buried in the ground, placed in the water, grass, made of camouflage and other ways to arm, to meet a variety of users arming needs.

Ground Effect Detection Sensor Technical Parameters:

• For product specifications, please download the product specification book to read.